Here you go Djzzz it is the LAW OF THE SQUARES...
The history of Magic or Latin squares dates back thousands of years, to the pyramids of ancient Egypt, and possibly even further back to the first Chinese dynasties. In fact, today, the Chinese people still use magic squares [Matrix] for cutting and trimming bonsai trees to the correct mathematical ratios of nature. By understanding the natural laws, one can argue that the Universe is simply precision mathematics. It is created with natural mathematical laws.
http://www.searlsolution.com/technology4.html
"The being said, the SEG is composed of a series of neodynmium rollers that have been pressure-fitted into layered jackets of nylon, titanium, and aluminum. The layered rollers sit on a ring that is also composed of layered neodynium, and the rollers are spun around this ring at high-speeds like a gigantic roller-bearing to create the Searl-Effect."
http://www.americanantigravity.com/searleffect.html
Searl Effect Technology
The Searl Effect Generator (SEG) is a magnetic diode, and what one may consider one of the original "Free Energy" Devices. The inventor of the technology is Professor John Robert Roy Searl of England. The SEG in essence is a composite ring made of an electron reservoir (a rare earth like Neodymium), a magnetized accelerator stage (Iron or Nickel), an electron flow regulator stage (Nylon 66 or Teflon), and finally, a paramagnetic layer (Aluminium or Copper). The design of the SEG is both beautifully simple and infuriatingly complex at the same time. The craft pictured here are Inverse Gravity Vehicles (IGVs), of which 41 prototypes were built, and one large version was constructed, the DEMO-1, in 1968. The smaller craft were the P series IGVs, approximately 11 feet in diameter and weighing a few tonnes. DEMO-1 was 21 feet in diameter and weighed 11 tonnes. You can see it flying here to the right.
Inside each of these IGVs there is a powerful 3-ring SEG which provides levity to the craft through a combination of magnetic, electrostatic and flywheel effects, many of which I freely admit are beyond my comprehension.
The iron element in the SEG "plate" (the big ring) is magnetized with a combined DC and AC magnetizing sequence which causes many poles to form all over the surface of the iron, in a wave like pattern corresponding to the AC frequency used. The iron element is then combined with the others (which are NOT involved in the magnetizing process) in a process called sintering - pushing them together under pressure. The same is done for the smaller magnets, or "rollers", except that each roller consists of eight stacked segments held together by the magnetic field. When you have twelve roller stacks and a correctly magnetized plate, and place the rollers on the plate as below, something truly amazing happens.
There are only ten rollers in the picture for safety reasons, as in a full set, the rollers will accelerate to 250km/h around the plate! This incredible feat is due to the instability of having an AC sine imprint on the plate and a cosine print on the rollers - instability created as the fields conflict causes the rollers to orbit the plate. They are held down by the magnetic field and thrown out by the centrifugal forces, so the rollers do not actually touch the plate when in motion. Thus, friction is virtually non-existent, and the high electrostatic charge accumulated by the SEG soon ionises all the nearby air and pushes it totally away from the SEG, enveloping it in an intense vacuum. High voltage flashover thus becomes impossible, and the potentials created by the generator can reach monstrous levels.
Unlike any other form of electrical technology, the presence of electron flow throught the generator actually cools it, reducing the resistance. This is due to free electrons being pulled out of the air and the resulting energy deficit causing the air to cool. As one places a greater and greater load on the SEG's induction coils (fitted so that the rollers pass through them to produce high-frequency AC), the rollers accelerate to accomodate the added energy drain, more power is pulled from the air, and the temperature lowers even further. A critical point is eventually reached. At 4 degrees Kelvin, the SEG superconducts and totally loses all electrical resistance. At this point, it levitates, completely enveloped in a perfect vacuum. Without control, it will accelerate up away from the Earth and disappear off into space, never to be seen again. To control it, a powerful radio frequency emitted nearby is required. If the same RF is transmitted as the AC frequency used to magnetise the rollers, they will completely stop. This acts as an ideal control gate, preventing the loss of costly generators.
THIS SECTION ADDED 08/11/2000
This area will now house all the Searl-related pictures I can get my hands on. They say that a picture speaks a thousand words......
Links to related sites.......
The Official Website owned and operated by John R.R. Searl, based in the United Kingdom.
John Thomas's Website - the American half of Searl's company.
The Website which introduced me to Searl Technologies. Not brilliant for technical information, but an excellent starting point.
http://www.angelfire.com/scifi/EclipseLab/segpage.htm
TECHNICAL DESCRIPTION
Physically the Searl Effect Generator (SEG) consists of three concentric rings each made of a composite of four different materials which are also concentrically attached to each other. The three rings are fixed to a base. Surrounding each of the rings, and free to rotate around them, are rollers - typically 10 on the first ring, 25 on the next and 35 on the outer ring. Surrounding the rollers on the outer ring are coils which are connected in various configurations to supply either AC or DC current at a variety of voltages.
http://www.sisrc.com/c1.htm
The power source for this amazing disc can also be used to generate electricity with no apparent input from outside. Because of the obvious economical repercussions to the big money oil industries, this marvelous invention was squelched.
http://antigravitypower.tripod.com/exper4.html
Searleffect...
http://searleffect.com/free/allaccess/allaccess.html
Re Prof. Searl
He is giving another Seminar in London on 1st June 1996. He now defines the Searl Effect as: based on magnetic fields that generate a continual motion of magnetic rollers around magnetized rings producing electrical energy and, under certain conditions, an inverse gravity effect that can be used for propulsion. Other effects include negative ionisation of the surrounding air.
Prof. Searl will be explaining the Law of the Squares, the principle which produces the effect.
For more info call Searl direct on Tel. 0181 200 0714, fax 0181 200 5932 or check the DISC Web Page:
http://www.moose.co.uk/userfiles/prof.j.searl/index.html
...Flying Moose(cmkx-treme)
